27 results
Alloy strips 3110247 and 3110249 (length 3.25 m and 2.50 m) are installed with tensioners 3110275DR and 3110275GA. They are also installed with tensioners 3110234DR/GA and 3110238DR/GA
End pieces 3110925 are installed with tension strips 3110937 and 3110932.
Geomet steel connector 3110928 is specifically designed to be installed with Ø 25 mm cover tensioners.
Geomet steel connector 3110927 is specifically designed to be installed with cover tensioners with a 12x12 mm square drive.
Strip assembly 3110937 is also a ready to use alternative for installation with tensioners with a 12x12 mm square drive.
Strip assembly 3110937 is also a ready to use alternative for installation with tensioners with a 12x12 mm square drive.
Tension strip 3110937 is designed to be installed with cover tensioners with a 12x12 mm square drive. (Part numbers 3110862/863, 3110877/878, 3110893/894 and 3110895/896).
Alloy strips 3110247 and 3110249 (length 3.25 m and 2.50 m) are installed with tensioners 3110234DR/GA and 3110238DR/GA.
Cover attachment strip 3110273 is specifically designed to be easily inserted into cover tension strips 3110932, 3110937 and 3110247/249.
The cover will be locked inside the strip when the attachment strip is in the cover sleeve.
The cover will be locked inside the strip when the attachment strip is in the cover sleeve.
Yes, it is P/N 2141218BA. Guide 2141218BU and rod 2141218TR can also be ordered separately.
MN means that the lock has the same key combination number.
CV means that the lock has a variable key combination.
CV means that the lock has a variable key combination.
No, they are only compatible with lock 2141218.
NO, they are not currently listed as spares.
NO, they are not currently listed as spares.
Cataphoresis is supplied with a non-rust commitment of 500 h on plane faces. This is a standard value for cataphoresis treatment. No specific test has been conducted on this part.
Maximum tensions are:
0904453: 250 daN
0904454: 300 daN
0904540: 300 daN
0904453: 250 daN
0904454: 300 daN
0904540: 300 daN
The bowl is manufactured in stainless steel 304.
The hinge is in stainless steel and the bolt is in nickel plated steel.
Raise the inner handle to lock it and push it downwards to open it.
The Kinnegrip 3D files can be downloaded from our site or directly from the Kinnegrip site
https://www.solidcomponents.com/?company=SCCBW34JG
https://www.solidcomponents.com/?company=SCCBW34JG
Our POMMIER ITALIA plant mainly transforms austenitic stainless steel, grade 304.
No, our plants do not transform stainless steel 316, which is a “Marine” grade. We mainly transform austenitic stainless steel, grade 304.
Our plants transform austenitic stainless steel, grade 304, of high quality. The traces of rust are due to external pollution: soiling containing metal particles, use of steel mountings, installing mounting pins using a hammer, which transfers metal particles, exposure to metal particles when grinding metal elements.
In this case, the rust is only surface rust and has no impact on the integrity of the product. It can be removed by cleaning.
In this case, the rust is only surface rust and has no impact on the integrity of the product. It can be removed by cleaning.
Our locks and latches with barrels are supplied with keys with numbers that may vary.
We recommend our seals P/N 1132400 or 1132397.
Operation of the partition involves several factors:
The partition elevators, which should have elements to provide optimum sliding:
We recommend our ADELIFT or POWERLIFT elevators, which ensure ergonomic operation.
The presence of a decompression hatch. In this case, we recommend the installation of an OXZY decompression hatch, P/N 240511796, specifically designed for this application.
The partition elevators, which should have elements to provide optimum sliding:
We recommend our ADELIFT or POWERLIFT elevators, which ensure ergonomic operation.
The presence of a decompression hatch. In this case, we recommend the installation of an OXZY decompression hatch, P/N 240511796, specifically designed for this application.
Both systems are designed to raise mobile partitions in multi-temperature transport vehicles.
POWERLIFT elevators should be preferred when the partition is positioned far into the vehicle. ADELIFT elevators should be preferred when the partition is positioned close to the vehicle rear doors. Furthermore, the width of the ADELIFT elevator slide rails provides easier retrofitting.
POWERLIFT elevators should be preferred when the partition is positioned far into the vehicle. ADELIFT elevators should be preferred when the partition is positioned close to the vehicle rear doors. Furthermore, the width of the ADELIFT elevator slide rails provides easier retrofitting.
The replacement barrel is part number 021603860.
Key set N° 3194 is part number 021603864.